National Tobacco Enterprise vacancy
Position 1: Description for a Junior Quality Assurance Inspector
Location: Addis Ababa
Purpose:
The preparation of samples and chemical analysis at the chemical laboratory are under the purview of the quality assurance inspector.
In addition to analysing the chemical composition of tobacco samples from BCL and green leaves, they are also evaluating the quality of stem and lamina products used in the BCL operation process.
In addition, the sending of IS, CAS1, CAS3, and CPA samples to JTI units is the responsibility of quality assurance inspectors.
Principal Responsibilities
Chemical evaluation
sample preparation for stem and deterioration testing, as well as for chemical analysis.
Chemical test preparation and standardisation
cleaning, drying, and placement of glassware in the appropriate locations
following chemical analysis.
Aftercare for chemical storage.
Dryness testing
For cross-checking halogen analyzers and other moisture measuring tools, use HOV moisture analysis.
Regular HOV moisture analysis for the purpose of collaborative research and effective use of input.
Sample distribution
Keep track of the samples’ delivery from Robi and Hawassa and their proper receipt.
sending of the assembled composite samples (CAS1, CAS3, and CPA) to the targeted JTI units.
handling of lab equipment
handling laboratory equipment properly, monitoring performance, and reporting in the event of any maintenance or failure.
the correct storage and handling of equipment accessories, operating instructions, rules, and job instructions.
Follow up on the calibration of your lab equipment and use the results in your daily operations.
Other
Respond to numerous requests from your supervisor and as they come up.
Position Requirements
Education:
BSC Having a degree in chemical engineering, industrial chemistry, or applied chemistry.
Job Background:No prior work experience is necessary.
Knowledge:
Fluent speaking and writing in the language English
Computer proficiency – understanding of Microsoft Office (Microsoft word, Excel and PowerPoint)
Position 2: Junior Quality Control Inspector
Location: Robi, Amhara
Purpose:
quality assurance Inspectors are in charge of overseeing BCL operation to make sure that quality satisfies JTI standards. Also, it is their duty to examine and evaluate the stem and lamina products’ quality.
Additionally, quality control inspectors gather samples and create composite samples for delivery to ETP1 in order to determine stem and lamina, perform CAS1 and CAS3 tests, and determine moisture cross-checking.
Principal Responsibilities
sample gathering
For stem and lamina, CAS1, CAS3, moisture, chemical testing, and moisture cross-checking determination, samples are collected during the production process.
preparation and delivery of samples creation of a composite sample for stem, lamina, CAS1, CAS3, chemical test, and determination of moisture cross-checking.
Sample delivery to ETP1 for stem, lamina, CAS1, CAS3, chemical analysis, and determination of moisture cross-checking.
Optimal Equipment Performance
Measure the butt cut length in the BCL operation feeding line and provide the operator with the necessary input to maintain the process’s high standards.
chopping up samples for chemical and moisture tests.
Using a halogen analyzer to detect moisture, record findings, provide feedback to workers, and monitor process stability.
Moisture test for the formation of lamina and long stems.
measuring the products’ temperatures at the lamina and long stem stages.
OBJ dimensions
good calibration and handling of the device.
Cleaning quality measuring equipment (QME) correctly is essential for the device’s security.
handling equipment accessories, operating instructions, rules, and work instructions correctly.
Monitoring the handling, operation, and reporting of laboratory equipment in case any maintenance is required due to failure.
equipment calibration on time, including for scales, laser thermometers, halogen analyzers, and other devices.
Other
Respond to numerous requests from your supervisor and as they come up.
Position Requirements
Education: from a reputable university, in chemical engineering, process engineering, or industrial engineering.
Job Background:No prior work experience necessary.
Knowledge:English writing and speaking is both fluent.
Knowledge of Microsoft Office (Microsoft-word, Excel, and PowerPoint)
Position 3: Junior Quality Control Inspector
Location: Hawassa, SNNPR
Purpose:
quality assurance Inspectors are in charge of overseeing BCL operation to make sure that quality satisfies JTI standards.
Also, it is their duty to examine and evaluate the stem and lamina products’ quality.
Additionally, quality control inspectors gather samples and create composite samples for delivery to ETP1 in order to determine stem and lamina, perform CAS1 and CAS3 tests, and determine moisture cross-checking.
Principal Responsibilities
sample gathering
For stem and lamina, CAS1, CAS3, moisture, chemical testing, and moisture cross-checking determination, samples are collected during the production process.
preparation and delivery of samples
creation of a composite sample for stem, lamina, CAS1, CAS3, chemical test, and determination of moisture cross-checking.
sending a sample to ETP1 for stem and lamina analysis, CAS1 and CAS3 testing, and moisture cross-checking analysis.
Principal Responsibilities
sample gathering
For stem and lamina, CAS1, CAS3, moisture, chemical testing, and moisture cross-checking determination, samples are collected during the production process.
preparation and delivery of samples
creation of a composite sample for stem, lamina, CAS1, CAS3, chemical test, and determination of moisture cross-checking.
Sample delivery to ETP1 for stem, lamina, CAS1, CAS3, chemical analysis, and determination of moisture cross-checking.
Optimal Equipment Performance
Measure the butt cut length in the BCL operation feeding line and provide the operator with the necessary input to maintain the process’s high standards.
chopping up samples for chemical and moisture tests.
Using a halogen analyzer to detect moisture, record findings, provide feedback to workers, and monitor process stability.
Moisture test for the formation of lamina and long stems.
measuring the products’ temperatures at the lamina and long stem stages.
OBJ dimensions
good calibration and handling of the device.
Cleaning quality measuring equipment (QME) correctly is essential for the device’s security.
handling equipment accessories, operating instructions, rules, and work instructions correctly.
Monitoring the handling, operation, and reporting of laboratory equipment in case any maintenance is required due to failure.
equipment calibration on time, including for scales, laser thermometers, halogen analyzers, and other devices.
Other
Respond to numerous requests from your supervisor and as they come up.
Position Requirements
Education:from a reputable university, in chemical engineering, process engineering, or industrial engineering.
Job Background:
No prior work experience necessary.
Knowledge:English writing and speaking is both fluent.
Microsoft Office proficiency on a computer (Word, Excel, as well as PowerPoint)
How to Apply
Only qualified candidates are invited to submit their application materials,
which should be received before the application deadline,
by email at
The position title must be included in the application email topic.
Failing to follow the directive may result in outright rejection.
Application is particularly recommended for female candidates.
Only those who have been shortlisted will be contacted.
Date of Expiration : Apr 27, 2023
